สยาม แมคคาทรอนิค

ลวดทองเหลือง เกรดพิเศษ diameter 0.07 mm.

฿0.00
ลงทองเหลือง โอกิ เกรดพิเศษ ตัดงานละเอียด ไดมิเตอร์ 0.07 มม.
เหลือ 1 ชิ้น
  • หมวดหมู่ : ลวด WIRE CUT
  • รหัสสินค้า : 000944

รายละเอียดสินค้า ลวดทองเหลือง เกรดพิเศษ diameter 0.07 mm.

ลวดทองเหลือง ผสมอัลลอย์ด 

  OKI   OB-07S

เป็นลวดที่มีขนาดเล็กที่สุด จะใช้ทองเหลืองประเภทโลหะผสมพิเศษตระหนักถึงการลดลงของค่าใช้จ่ายเมื่อเทียบกับลวดทังสเตนที่แพงมาก OKI OB-07S แสดงประสิทธิภาพสูงสุดใน EDM ลวดเครื่อง EDM วัตถุประสงค์เฉพาะสำหรับการใช้ลวดที่ดีสำหรับเครื่องจักรที่ต้องการความแม่นยำของแม่พิมพ์ สำหรับกรอบและอื่น ๆ เส้นผ่าศูนย์กลางลวดเป็น 0.07mmf

 

เมื่อเทียบกับลวดทังสเตน 0.05mmf, หน้าตัดอย่างน้อยเป็นที่ดีและยังมีความเร็วในการใช้เครื่องจักรที่จะเหมือนกัน
 

Wire diameter and characteristics

Wire diameter symbol Type symbol Standard wire diameter
mm
Wire diameter tolerance
mm
Tensile strength
MPa
Fracture load
N
Conductivity
%
7 S 0.07 +/-0.001 950(Min) 3.7(Min) 21(Min)

Bobbin

Bobbin symbol Standard Quantity of wire
kg
P-3R 0.5
1.5

 is a standard stock product, and  is a product on that can be produced to order.

This type has the smallest wire diameter in the series.
It uses a brass type special alloy, realizing a reduction of cost compared to expensive tungsten wire.
It exhibits maximum EDM performance in a wire EDM machine intended exclusively for using fine wire for precision machining of molds for lead frames, and so on.
The wire diameter is 0.07mmf.
Compared to 0.05mmf tungsten wire, the cut face is at least as good and also the machining speed is the same.