สยาม แมคคาทรอนิค

ลวด OKI รุ่น OB-PZN

฿1.00
ลวด OKI OB - PZN เป็นลวดที่รับรองโดย FANUC LTD.-wire with no paraffin coated-ชนิดเป็นลวดพิเศษพัฒนามาเพื่อใช้กับเครื่องhigh-speed และรุ่น aut
เหลือ 0 ชิ้น
ซื้อเลย
หยิบลงตะกร้า
  • หมวดหมู่ : ลวด WIRE CUT
  • รหัสสินค้า : 000190

รายละเอียดสินค้า ลวด OKI รุ่น OB-PZN

    ลวด OKI OB - PZN  เป็นลวดที่รับรองโดย FANUC LTD.
-wire with no paraffin coated-    
ชนิด เป็นลวดพิเศษพัฒนามาเพื่อใช้กับเครื่อง
  high-speed และรุ่น automatic ตัดงาน 
  finishing และตัดงานละเอียด  
This product has been certified and recommended 
  by FANUC LTD.    
เส้นผ่าศูนย์กลาง   0.10 P3R    
  0.15 P3R    
  0.20 P5R/P10T/P15/K160/K200
  0.25 P5R/P10T/P15/K160/K200
  0.30 P5R/P10T/P15/K160/K200

 

Zinc-coated wire OS-Z wire          
* This zinc-coated wire consists of brass wire electroplated with high purity zinc. The high plating
  accuracy realizes faster machining speed and also provides a better surface finish on the work piece.
* The high purity zinc layer formed on the surface of the brass by means of our unique electroplating
   technology realizes higher machining speed.        
* By uniformly coating the surface of the wire with zinc, which has good discharge characteristics,
  it is possible to create a finer discharge compared to when using general brass wire. In the 
  finishing process, improved surface roughness and a better machined profile are obtained,
  resulting in high cost performance.          
* Almost no copper adheres to the work piece.        
* The zinc coating method is a method of coating by electroplating. It is not a method in 
   which is wire is dipped in molten zinc.          
* A high purity uniform zinc layer can be obtained.        
* The discharge is stable and free of irregularities.        
* Impurities are kept to the minimum, thus preventing deterioration of performance.  
                   
Wire diameter and characteristics          
Wire diameter symbol Type symbol Standard wire diameter Wire diameter tolerance Tensile strength Fracture load Conductivity      
mm mm MPa N %      
10 Z 0.1 +/-0.001 883(Min) 6.97(Min) 20(Min)      
15 0.15 15.6(Min)      
20 0.2 27.7(Min)      
25 0.25 43.3(Min)      
30 0.3 62.4(Min)